Hallo,

bei FTP-Adressen klappt die Überwachung sehr gut.

ist die Überwachung einer http-Adresse auf der alle paar Stunden eine neue csv-Datei abgelegt wird auch möglich?

Hallo Dirk,

ja die Datei heißt itemsinstock.txt und liegt im Verzeichnis /invents auf der webadresse aber wenn ich im Feld FTP-Server diese Adresse eingebe bzw. den komplette Dateipfad eingebe sagt mir WatchFTP dass die Verbindung mit dem Server nicht hergestellt werden kann.

ChilkatLog:
 Connect_Ftp2:
   DllDate: Nov 16 2017
   ChilkatVersion: 9.5.0.70
   UnlockPrefix: WTCHDR.CBX0522
   Architecture: Little Endian; 64-bit
   VerboseLogging: 0
   ProgressMonitoring:
     enabled: yes
     heartbeatMs: 0
     sendBufferSize: 65536
   --ProgressMonitoring
   ImplicitSsl: 0
   AuthTls: 0
   AuthSsl: 0
   ftpConnect:
     Hostname: http:txxxb.trixxxn.dx
     Port: 80
     IdleTimeoutMs: 20000
     socket2Connect:
       connect2:
         connectSocket:
           connect_ipv6_or_ipv4:
             resolveHostname6:
               getAddressInfo:
                 Failed to get host address info. (3)
                 SocketError: WSAHOST_NOT_FOUND No such host is known.
                 hostOrIpAddr: http
                 port: 80
                 Versions of Windows earlier than Windows XP are limited to handling IPv4 only
                 On Windows Server 2003 and Windows XP, IPv6 addresses are returned only if IPv6 is installed on the local computer.
               --getAddressInfo
             --resolveHostname6
             Domain to IP address resolution failed.
           --connect_ipv6_or_ipv4
           connect_ipv6_or_ipv4:
             resolveHostname6:
               getAddressInfo:
                 Failed to get host address info. (3)
                 SocketError: WSAHOST_NOT_FOUND No such host is known.
                 hostOrIpAddr: http
                 port: 80
                 Versions of Windows earlier than Windows XP are limited to handling IPv4 only
                 On Windows Server 2003 and Windows XP, IPv6 addresses are returned only if IPv6 is installed on the local computer.
               --getAddressInfo
             --resolveHostname6
             Domain to IP address resolution failed.
           --connect_ipv6_or_ipv4
         --connectSocket
         ConnectFailReason: DNS lookup failed
       --connect2
     --socket2Connect
     ConnectFailReason: 2
   --ftpConnect
   Failed to connect to FTP server.
   Failed.
 --Connect_Ftp2
--ChilkatLog

Ok,

vielen Dank!